Door sensor installation

The door sensor detects the opening and closing of a door. The sensor and magnet are mounted with double-sided tape. When the door is opened, the sensor transmits an alarm if the system is armed.

1. Identify each door sensor based on the location on the label. Do not place it yet!

2. Clean the location on the door. Prepare to place the sensor on its side with the knob on the door.

3. The sensor and magnet will have the width of a pencil (1/4 ") and the arrows will face each other.

4. Remove the sensor ribbon holder and place it on the frame with the arrow facing the door.

Note: If the sensor does not fit on the frame, you can place the sensor on the door.

5. Place the magnet on the door with the arrow facing the sensor. Finish by attaching the sensor and magnet by pressing for 10 seconds.

REMINDER: Make sure that the 3 lines of the sensor are pointing towards the magnet. If this is not done, the sensor will not display the correct status on your control panel.

Installing the window sensor

The window sensor detects the opening and closing of a window. The sensor and magnet are mounted with double-sided tape. When the window is open, the sensor transmits an alarm if the system is armed.

1. Identify each door sensor based on the location on the label. Do not place it yet!

2. Clean the location on the window. Be prepared to place the sensor on the side where the window opens first.

3. The sensor and magnet will have the width of a pencil (1/4 ") and the arrows will face each other.

4. Remove the tape from the sensor and place it on the frame with the arrow pointing toward the window.

Note: If the sensor does not fit on the frame, you can place the sensor on the window.

5. Place the magnet on the window with the arrow facing the sensor. Finish by attaching the sensor and magnet by pressing for 10 seconds.

REMINDER: Make sure that the 3 lines of the sensor are pointing towards the magnet. If this is not done, the sensor will not display the correct status on your control panel.